Revolutionizing MRI Technology:
MY-D054K 1.5T Helium-Free Superconducting MRI System
In an era where safety, efficiency, and sustainability are paramount in healthcare, we proudly introduce the MY-D054K 1.5T Helium-Free Superconducting MRI System — a next-generation imaging solution that integrates solid conduction cooling technology, AI-powered acceleration, and comprehensive clinical capabilities to redefine performance, safety, and operational cost-efficiency.
✅ Revolutionary Helium-Free Superconducting Magnet Technology
The core innovation of the MY-D054K lies in its completely helium-free superconducting magnet, enabled by breakthrough solid conduction cooling technology. This eliminates dependence on liquid helium — a rare and increasingly scarce resource — while ensuring long-term magnetic stability and system reliability.
Key Differences vs. Traditional Helium-Based MRI Systems:
| Feature | Traditional Superconducting MRI | MY-D054K Helium-Free MRI |
|---|---|---|
| Liquid Helium Volume | 1000–1500 L | 0 L |
| Daily Helium Loss | Yes (boil-off) | Zero consumption under any condition |
| Safety Risks | Quench venting, asphyxiation, frostbite | No cryogenic liquids or high-pressure vessels |
| Quench Pipe Required | Yes | No — enhanced safety and space savings |
| Installation Requirements | Special ventilation, helium containment | Flexible installation — no helium room needed |
| Transportation | Restricted (especially air freight) | Supports sea, air, and road shipping globally |
Using a high-thermal-conductivity “thermal bridge” connected to a cryocooler, the MY-D054K maintains superconductivity without liquid helium immersion. This results in:
- Zero helium dependency — no refills, no supply chain risks
- Enhanced safety — fully sealed system with no pressure differential
- Automatic ramp-down/up during power failures
- Modular design with automatic quench recovery
- Lower total cost of ownership — eliminate helium purchase costs
⚙️ High-Performance Hardware Platform
🔹 Superconducting Magnet System
- Field Strength: 1.5 Tesla
- Bore Diameter: 60 cm (reduces patient anxiety and claustrophobia)
- Magnet Length: Only 157 cm (ultra-short design)
- Magnetic Field Stability: ≤0.10 ppm/hour
- Homogeneity: ≤0.4 ppm (Vrms, within 45 cm DSV)
- 5-Gauss Line: 4m (axial), 2.5m (radial) — compact fringe field reduces shielding needs
- Weight: ~4400 kg
- Shimming: Passive + Active
🔹 Gradient System
- Gradient Strength: 38.5 mT/m (single-axis)
- Slew Rate: 175 mT/m/ms (single-axis)
- Max FOV: 500 mm
- Min FOV: 20 mm
- Min Slice Thickness: ≤0.5 mm (2D), ≤0.1 mm (3D)
- Water-cooled, actively shielded — ideal for EPI, fMRI, and fast MRA
🔹 Digital RF System
- Operating Frequency: 63.87 MHz
- Transmitter Power: 18 kW
- Receiver Bandwidth: 1 MHz (high SNR and sampling speed)
- Time Resolution: 50 ns (Tx), 100 ns (Rx)
- True 16-Channel Independent Architecture with high-speed optical transmission
- 32-Channel Interface Reserved for future upgrades
🧠 AICS AI-Powered Acceleration Platform
The MY-D054K features the advanced AICS (AI + Compressed Sensing) Acceleration Platform, combining cutting-edge algorithms to dramatically reduce scan time while preserving diagnostic image quality — enabling up to 20x faster scanning.
Core Acceleration Technologies:
- Advanced Compressed Sensing (CS): Random undersampling + sparse transforms + iterative reconstruction
- Parallel Imaging (GRAPPA + SENSE): Multi-channel coil acceleration with aliasing correction
- Partial Fourier Acquisition: Leverages k-space symmetry for ultra-fast T2WI, MRCP, MRU
- DE-FSE (Driven Equilibrium): Reduces dead time in FSE sequences — ideal for spinal imaging
- AI Denoising: Machine learning reduces noise and Gibbs artifacts
- Pro RADAR: 3rd-generation Propeller technology for motion and susceptibility artifact suppression
🏥 Comprehensive Clinical Applications
The MY-D054K supports a full suite of clinical imaging protocols, optimized for precision diagnosis across departments:
Neuroimaging
- MPRAGE: High gray-white matter contrast for neurodegenerative disease assessment
- DWI, SWI, fMRI: Stroke, microbleeds, functional brain mapping
Vascular Imaging (MRA)
- TOF-MRA with TONE: Enhanced visualization of distal branches
- AI-enhanced 3D MRA: Automated post-processing for clearer vessel rendering
Body & Water Imaging
- 3D MRCP / MRU / MRM: Non-invasive cholangiography, urography, myelography
- Single-breath-hold liver scans: High gradient performance enables rapid dynamic imaging
Musculoskeletal & Pediatric Imaging
- High-resolution FSE for joint and soft tissue evaluation
- Pediatric-specific protocols with auto-parameter adjustment
🛠️ Ergonomic Design & Intelligent Workflow
Smart Motorized Patient Table
- Max Load Capacity: 200 kg
- Laser Positioning Accuracy: ±0.5 mm
- Vertical Travel: 270 mm — easier patient access
- Longitudinal Travel: 2070 mm
- Automatic stepping, retraction, and locking when scan center aligns with magnet isocenter
User-Friendly Interface
- Graphical, intuitive control panel
- Customizable, savable scan protocols
- Automatic coil detection and channel optimization
- Integrated body coil for whole-body imaging
🌍 Global Service & Support Network
We understand that uptime and service responsiveness are critical. The MY-D054K is backed by a global service infrastructure, with experienced engineers (5–10 years in radiology equipment) deployed across:
Uganda, Nigeria, Kenya, India, Turkey, UAE, South Africa, Ghana, DRC, Ethiopia, Haiti, Panama, Cameroon, Tanzania, Botswana, Malawi, Madagascar, Mozambique, Liberia, Gabon, Niger, Togo, Zambia, and more.
Three-Tier Support Model:
- Local On-Site Service: Rapid response from regional engineers
- Remote Support: 24/7 assistance from MAYA Service Center in China
- On-Site Expert Dispatch: Chinese senior engineers available for complex issues
Spare Parts Logistics:
- Local inventory of critical spare parts
- If not locally available, parts shipped from China within 2 working days
🎓 Professional Training & Certification
We offer hands-on, customizable training programs tailored to your clinical needs:
- Basic operation & safety procedures
- Sequence selection and parameter optimization
- Specialized imaging techniques (neuro, MSK, pediatric, etc.)
All participants receive an official certification upon completion, ensuring regulatory compliance and operational excellence.
Post-training support includes online resources, refresher sessions, and technical updates.
💡 Summary: The Smart Choice for Modern Healthcare
| Feature | Traditional 1.5T MRI | Low-Field Permanent MRI | MY-D054K Helium-Free 1.5T |
|---|---|---|---|
| Image Quality | Good | Poor | Excellent |
| Scan Speed | Fast | Slow | Ultra-Fast (AI+CS accelerated) |
| Patients per Day | ~50 | ~10 | Up to 50+ |
| Power Cost (Monthly) | ~$1,500 | ~$500 | ~$1,250 |
| Operating Cost | High (helium, maintenance) | Low | Very Low (zero helium cost) |
| Safety | Moderate risk | Safe | Highly Safe (no helium, no quench pipe) |
| Deployability | Limited by helium supply | High | Global (air/sea/road transport) |
📣 Conclusion
The MY-D054K 1.5T Helium-Free MRI System is more than a technological breakthrough — it’s a sustainable, intelligent, and future-ready imaging solution built for the evolving needs of modern healthcare.
With zero helium consumption, superior image quality, AI-accelerated workflows, and unmatched global service support, the MY-D054K sets a new benchmark in MRI innovation.
Choose MY-D054K — and step into a safer, smarter, and more sustainable future of medical imaging.
